1985–1989 Toyota Corona Chassis Parts
31 SLOOP-manufactured chassis-part SKUs covering 5 categories (61 OE cross-references) for the 1985–1989 Toyota Corona. Direct factory quotes, no distributor markup.
Ball Joint 12 parts
| OE numbers | Year fit | Position |
|---|---|---|
| 43308-12030 | 1970–1987 | LOW R/L |
| 43330-29135 | 1983–1987 | LOW R/L |
| 43330-29145 | 1985–2001 | LOW R/L |
| SLSB-0023 | 1973–2001 | — |
| SLSB-0023 | 1985+ | LOW R/L |
| SLSB-0023 | 1988–1992 | Front Axle Arm/Rod, Lower Left/Right |
| SLSB-0027 | 1973–2001 | — |
| SLSB-0027 | 1985–1987 | Front Axle Arm/Rod, Lower Right |
| SLSB-0027 | 1987–1992 | Front Axle Arm/Rod, Lower Right |
| SLSB-0028 | 1973–2001 | — |
| SLSB-0028 | 1985–1987 | Front Axle Arm/Rod, Lower Left |
| SLSB-0028 | 1987–1992 | Front Axle Arm/Rod, Lower Left |
Pitman Arm 4 parts
| OE numbers | Year fit | Position |
|---|---|---|
| 45401-19225 | 1982–1987 | RHD/LHD |
| SLSP-0009 | 1982–1987 | RHD/LHD |
| SLSP-0009 | 1982+ | RHD/LHD |
| SLSP-0009 | 1982+ | — |
Rack End 51 parts
| OE numbers | Year fit | Position |
|---|---|---|
| SLSR-0002 | 1973–2001 | — |
| SLSR-0002 | 1982–1987 | Steering system |
| SLSR-0002 | 1982–1987 | INNER BOTH |
| SLSR-0002 | 1982–1987 | R/L |
| SLSR-0005 | 1984+ | INNER BOTH |
| SLSR-0006 | 1983+ | — |
| SLSR-0007 | 1985+ | R/L |
| SLSR-0007 | 1985+ | INNER BOTH |
| 45503-29105 | 1985+ | R/L |
| SLSR-0008 | 1985+ | R/L |
| SLSR-0008 | 1985+ | INNER BOTH |
| 45503-19036 | 1984+ | — |
| 45503-19125 | 1984–1987 | R/L |
| 45503-17040 | 1984–1987 | — |
| 45503-19056 | 1984–1987 | R/L |
| SLSR-0010 | 1984–1987 | R/L |
| SLSR-0010 | 1984–1987 | INNER BOTH |
| SLSR-0010 | 1984+ | — |
| SLSR-0010 | 1984–1987 | — |
| SLSR-0013 | 1985+ | — |
| SLSR-0013 | 1988–1992 | — |
| 45503-29155 | 1987–2001 | R/L |
| SLSR-0021 | 1973–2001 | — |
| SLSR-0021 | 1987+ | R/L |
| SLSR-0021 | 1987+ | INNER BOTH |
| SLSR-0021 | 1987+ | — |
| SLSR-0021 | 1987–1992 | — |
| SLSR-0021 | 1988–1992 | Steering system |
| 45503-29165 | 1987–2001 | R/L |
| SLSR-0022 | 1973–2001 | — |
| SLSR-0022 | 1987+ | R/L |
| SLSR-0022 | 1987–1992 | INNER BOTH |
| SLSR-0022 | 1987+ | — |
| SLSR-0022 | 1987–1992 | — |
| SLSR-0022 | 1988–1992 | Steering system |
| SLSR-0022 | 1988–1992 | Steering system, Power Steering |
| SLSR-0022 | 1988–1992 | Front Left/Right |
| SLSR-0022 | 1988–1992 | — |
| SLSR-0032 | 1973–2001 | — |
| SLSR-0059 | 1984–1987 | R/L |
| SLSR-0059 | 1984+ | — |
| SLSR-0285 | 1982–1987 | Steering system |
| SLSR-0285 | 1982–1987 | INNER BOTH |
| SLSR-0285 | 1982–1987 | R/L |
| SLSR-0422 | 1984–1987 | — |
| SLSR-0423 | 1984–1987 | — |
| SLSR-0463 | 1973–2001 | — |
| 45503-29025 | 1983–2001 | R/L |
| SLSR-0476 | 1973–2001 | — |
| SLSR-0476 | 1983–1987 | Steering system, Left/Right |
| SLSR-0476 | 1983+ | R/L |
Stabilizer Link 16 parts
| OE numbers | Year fit | Position |
|---|---|---|
| 48830-12060 | 1987+ | — |
| 48830-32010 | 1987–2001 | REAR |
| TO4015 | 1987–1992 | — |
| 48820-20030 | 1987–1992 | FRONT R |
| SLSL-0006 | 1987–1992 | FRONT R |
| SLSL-0006 | 1987–1992 | Front Stabilizer, Right |
| SLSL-0006 | 1987–1992 | R |
| SLSL-0006 | 1987–1992 | — |
| SLSL-0006 | 1988–1992 | Front Right |
| TO4016 | 1987–1992 | — |
| 48810-20010 | 1987–1992 | FRONT L |
| SLSL-0007 | 1987–1992 | FRONT L |
| SLSL-0007 | 1987–1992 | Front Stabilizer, Left |
| SLSL-0007 | 1987–1992 | — |
| SLSL-0007 | 1988–1992 | Front Left |
| SLSL-0084 | 1985–1993 | FRONT BOTH |
Tie Rod End 18 parts
| OE numbers | Year fit | Position |
|---|---|---|
| 45046-29165 | 1987–2001 | OUT R |
| SLSE-0067 | 1973–2001 | — |
| SLSE-0067 | 1987+ | OUT R |
| SLSE-0067 | 1987–1992 | Steering system, Right |
| SLSE-0067 | 1987–1992 | FRONT RIGHT |
| SLSE-0067 | 1987+ | — |
| SLSE-0067 | 1988–1992 | Steering system, Right |
| SLSE-0067 | 1988–1992 | — |
| 45047-29045 | 1987–2001 | OUT L |
| SLSE-0068 | 1973–2001 | — |
| SLSE-0068 | 1987+ | OUT L |
| SLSE-0068 | 1987–1992 | Steering system, Left |
| SLSE-0068 | 1987–1992 | FRONT LEFT |
| SLSE-0068 | 1987+ | — |
| SLSE-0068 | 1988–1992 | Steering system, Left |
| SLSE-0068 | 1988–1992 | — |
| SLSE-0081 | 1973–2001 | — |
| SLSE-0082 | 1973–2001 | — |
Common questions
What chassis parts does SLOOPZONE supply for the 1985–1989 Toyota Corona?
SLOOPZONE supplies 31 chassis-part SKUs for the 1985–1989 Toyota Corona, covering ball joint, pitman arm, rack end, stabilizer link, tie rod end. Every part is manufactured at the SLOOP factory in Taichung, Taiwan, ships under the SLOOP brand, and is direct OEM-equivalent for the listed reference OE numbers.
Are SLOOP parts for the 1985–1989 Toyota Corona OEM-equivalent?
Yes. Every SLOOP chassis part is engineered to the original OEM specification — same geometry, same fitment, same material strength — and is cross-referenced to the original car-maker OE part number. SLOOP is an ISO 9001 certified manufacturer producing chassis parts since 1984.
What is the minimum order quantity?
Minimum invoice value is USD 5,000 per shipment. You can mix and match SKUs across categories to reach the floor; there is no minimum quantity per SKU within that envelope. Payment is 100% T/T bank wire in advance.
How many OE part numbers does SLOOPZONE cover for the 1985–1989 Toyota Corona?
This page lists 61 cross-referenced OE part numbers fitting the 1985–1989 Toyota Corona. Each SLOOP SKU links through to its OE-detail page where you can see the full cross-reference table (Honda/Acura, MOOG, TRW, 555, CTR equivalents) and request a factory quote.